Product Catalog

Floor covering scraper weighs 130 lbs. Removes glue-down carpet, hardwood flooring, linoleum, non-slip floor coverings, vinyl tile and other adhesive, cement or mastic .75-hp fan-cooled capacitor-start motor 37 ft. of FGI-protected extension cord. Features a scre-type height control with a foldable handle.

The modern day Concrete Floor Grinder was invented and is constantly improved by EDCO. The Magna-Trap™ Floor Grinders combine leveling systems, better dust control, and new accessories to create superior surface preparation machines.

12 x 18 sheets

available in 20, 36, 60, 80, and 100 grit

6.5" sandpaper disc

available in 50, 80 or 100 grit

Thicker pad, both sides of pads can be used

Removes cutback, multi-purpose adhesives and other hard-to-remove floor residue quickly and easily. The EZ Scrape consists of six carbide blades spring mounted on an aluminum casting which fits 175 RPM rotary disk floor machines. There are three different models to accommodate different diameter machines.

15" disk for 17" machines.

Super quiet, incredibly effective and practically maintenance free year after year. The improved, longer lasting and quieter Stripperior incorporate improvements on the industry standard. The performance-proven 2200 strokes a minute belt driven action and heavy gauge steel construction but product improvements reduce wear on the moving parts for lower maintenance costs, fewer replacements, and quieter operation.

Complete kit of the most frequently used tools for carpet installation.

Appliance Dolly

Features a 14-1/2" wide aluminum pin plate with 59 adjustable nickel plated pins. Non-marring tail block. Includes 4 tubing sections for operating length from 34-1/2" to 22 feet. Additional tubing can be added for longer stretches. Sturdy carrying case included.

The multi-purpose machine is designed for surfacing concrete floors, restoring or preparing wood decks and hardwood floors. Unique belt drive, three-head system is designed for smooth operation with superior results.

13 Gal

Ceramic tile scribe

8" Floor Scraper

Laminate Cutter

Carpet Edger

Efficiently removes dirt, debris, bacteria, mold, mildew, dust mites, pollen, wax, as well as chemical and detergent residue, petroleum based oil and grease, animal and vegetable fats from any surface.

Built for cleaning, buffing floors  or sanding wood floors

Pads, 17x1, strip, scub & polish

Available: White-Polish

               Tan-Buff

               Green-Scrub

               Black-Strip

Belts General Purpose Aluminum Oxide 3 x 21 36, 60 & 100 grit.

Discs General Purpose Floor Sanding 17 x 2

available in 20, 36, 60, 80, & 100 grit

Discs General Purpose Floor Sanding 7 x 7/8

available in 20, 36, 60, and 100 grit

8" Siliverline drum sander 8x20-1/8 comes in 20, 36, 60, 80 & 100 grit.

For the tightest floor possible choose the 2” x 16 Ga Porta-Nail by PNI. Porta-Nails are designed specifically for nailing tongue and groove wood floors using the Porta-Nailer and or Portamatic flooring installation tools This fastener has been the standard for close to 50 years and is recommended for use when installing 1/ 2 “ to 1” Solid wood flooring on a subfloor that is built with joists. The patent Porta-Nail offers the following features: Wide head wedge shaped design with well defined barbs which prevent the nail from backing out. A cupped point which enables the nail to cut through the wood thus minimizing the potential for splitting. These design features provide for the greatest impact and holding power to ensure that your floor lasts a lifetime. One pack of 1000 Porta-Nails will nail approximately 200 square feet of tongue and groove flooring.